Entrance Control Swing Gate Turnstile 1200mm Acrylic Arm 304 Stainless Steel Visitor Management

Product Introduction

The entrance control swing gate turnstile is a pedestrian access lane that turns a building entrance into a managed, measurable control point. Instead of only opening and closing an arm, the unit verifies the credential, records the pass, counts the visitor flow and reports the lane status back to the operator. The 1200*200*980mm stainless steel cabinet and transparent acrylic swing arms suit lobbies, exhibition halls, sports venues, hospitals, government service centres and factory gates, while the 550-850mm channel accepts both standard pedestrian use and wider access for visitors with luggage or mobility equipment. One lane passes 30 people per minute normally closed and 40 people per minute normally open with a 0.5 second opening, so entry control does not slow the crowd. The controller supports RFID/IC/ID cards, QR codes, face recognition, fingerprint, mobile NFC and remote door opening, and it adds real time visitor counting with capacity alerts, a dynamic flow limiting mechanism and programmable operating status, so operators know how many people are inside and can stop entry automatically when a set limit is reached. Fault self diagnosis, an LCD screen, and power failure fire safety protection keep the lane safe and serviceable through daily use.

Product Advantages

1. Entrance Control That Records Every Pass

Every verified entry is written to the controller, so the lane produces an access record instead of only a mechanical open and close. Operators can review counts by lane, by hour and by credential type, which turns an ordinary gate into the data source for entrance control and security review.

2. Real Time Visitor Counting and Capacity Alerts

The system counts entries and exits live and raises an alert when the number of people inside approaches a configured limit. Museums, exhibition halls and venues with occupancy rules can then pause entry on the lane itself instead of relying on manual head counting at the door.

3. Dynamic Flow Limiting

Lanes can be switched between normally open, normally closed and controlled flow modes according to the time of day or the event schedule. During a peak, extra lanes open automatically; during a quiet period, a single lane handles the traffic, which reduces staffing and keeps the entrance control policy consistent.

4. One Controller for Multiple Credential Types

The same unit reads RFID/IC/ID cards, QR codes, face recognition, fingerprint, mobile NFC and password input, and it accepts remote door opening from the control room. Card, face and QR systems can run side by side on the same lane, so an organisation does not need to replace existing credentials to gain entrance control.

5. Safety, Self Diagnosis and Power Failure Protection

The gate reports motor, sensor and communication faults through self diagnosis and an alarm, shows status and prompts on the LCD screen, and releases the arms automatically on power failure so people can leave in an emergency. These functions keep the lane compliant with fire safety expectations and reduce downtime for the property team.

Frequently Asked Questions

1. What does entrance control mean for a swing gate turnstile?

It means the lane verifies credentials, records each pass, counts visitors and reports lane status, rather than only opening an arm. The controller can enforce time rules, credential types and capacity limits, and it can feed those records into a security or visitor management platform.

2. Can this turnstile work with facial recognition?

Yes. The unit accepts face recognition terminals alongside RFID/IC/ID cards, QR codes, fingerprint, mobile NFC, password entry and remote door opening. Face terminals can be combined with card readers on the same lane so different user groups keep their existing credential.

3. Is this gate suitable for disabled access and wider channels?

The standard channel is 550-850mm and cabinet size can be customised, so a wider lane can be specified for wheelchair users, visitors with luggage or service trolleys. The 0.5 second arm opening and normally open mode also make assisted passage smoother at reception.

4. Can the system be integrated with third-party software?

Yes. The lane provides relay switch signals, 12V level signals and 12V pulse signals with pulse width over 100ms, plus RS485 or TCP/IP communication, so it can be integrated with third-party access control, ticketing, visitor management and security platforms through standard interfaces.

5. Is OEM customisation available?

Yes. Cabinet size, channel width, surface finish, logo and credential configuration can be customised for OEM projects. Our team can review drawings, lane layout and packing requirements before production and support the project through installation.

Planning an entrance control project? Contact us for a free consultation, customised lane layout, factory pricing and technical support for your building entrance.