Office Building Swing Gate Turnstile 1200mm 304 Stainless Steel Acrylic Arm With Silent Brushless Drive

Product Introduction

This office building swing gate turnstile is configured for corporate lobby entrances where staff, visitors and contractors share the same lane from morning rush to late shifts. The silent brushless drive keeps the acrylic arm moving without the mechanical clack of solenoid units, so the reception area stays quiet during meetings, and the 0.5 second opening cycle clears a 30 person per minute flow at shift change. Employees pass with an IC card, a face, a QR code or an NFC phone, while the reception desk issues temporary QR codes to visitors and releases the lane remotely when needed. The 1200mm cabinet fits into narrow elevator lobbies and the 550-850mm channel accepts laptop bags, trolley cases and cleaning carts. Relay, 12V and RS485/TCP-IP interfaces let the swing barrier gate link with the existing access control and fire alarm system of the building.

Product Features & Advantages

1. Silent Brushless Drive For Corporate Lobbies

The brushless DC drive and the cushioned arm movement keep operating noise low, so the turnstile does not interrupt reception conversations, meeting rooms next to the lobby or after-hours quiet zones. Smooth acceleration also reduces wear on the swing arm mechanism and extends service life beyond 5 million cycles.

2. Employee And Visitor Traffic On One Lane

Staff pass hands-free with an enrolled face, an IC/ID card or an NFC phone, while the reception desk sends a temporary QR code to each visitor. Both groups use the same 550-850mm channel, which means a single swing gate turnstile covers the morning staff surge and the visitor flow without splitting the lobby into separate lanes.

3. Compact 1200mm Footprint For Elevator Lobbies

The cabinet measures 1200*200*980mm, so it installs along a wall or between elevator banks without blocking the fire evacuation route. Sizes can be customised when the lobby has a curved reception counter or an unusual passage width.

4. Four Pairs Of Infrared Sensors Guard The Channel

Four pairs of infrared sensors monitor the whole passage. Tailgating attempts, a second person following an authorised card, or someone standing inside the channel all trigger the alarm output and hold the arm, which keeps unauthorised entry out of the office floors.

5. Fire Alarm And Power Failure Linkage

The control board accepts a fire alarm dry contact and unlocks the arms automatically on a signal or on power failure, turning the lane into a free exit for evacuation. Backup power is available as an option for buildings that need the lane to keep running during a mains outage.

6. 304 Stainless Steel Finish For Office Interiors

The 304 stainless steel cabinet with transparent acrylic swing arms matches glass curtain wall and stone lobby finishes. Power consumption is 100W and the unit runs on AC220V +/-10% 50Hz, so it connects to the standard building supply, and the IP43 cabinet suits indoor lobby installation.

Frequently Asked Questions

1. Is this swing gate turnstile suitable for an office building lobby?

Yes. The 1200mm cabinet is designed for corporate lobbies and elevator halls, the silent brushless drive keeps the reception area quiet, and the lane handles both employee and visitor verification. Indoor installation with the IP43 cabinet is the standard configuration.

2. How do visitors get through the gate?

The reception desk issues a temporary QR code or a visitor card, and the visitor passes the lane the same way as staff. The reception can also open the gate remotely from the management platform, so a guest is never left waiting at the entrance.

3. Does the gate connect to our fire alarm system?

Yes. The control board accepts a fire alarm dry contact and unlocks the arms when the signal is received or when power fails, so the lane becomes a free passage for evacuation. This is a standard requirement for office building projects.

4. What communication interface does it provide?

The turnstile supports relay switch signal, 12V level signal and 12V pulse signal with pulse width over 100ms, plus RS485 or TCP/IP communication. It integrates with access control, visitor management and building management platforms already used in the office.

5. Can the lane width be adjusted for trolley cases?

The standard channel width is 550-850mm, which accepts laptop bags and trolley cases. Wider channels or different arm lengths can be customised for cleaning carts, delivery trolleys or accessibility requirements.